Siemens Sirius 3RW44 V.6.2 User Manual

Getting Started
Industrial Controls
Function Block Library Soft Starter SIRIUS 3RW44 for SIMATIC PCS 7
PCS 7 Soft Starter 3RW44 V6.2 / V7.1 / 3RW44 Soft Starter PCS 7 Library V8 Migration V8.0+SP2
Edition 05/2015
Answers for industry.

Siemens Sirius 3RW44 V.6.2 Specifications

General

Adjustable motor current	Yes
Product category	Soft starter
Product type designation	3RW44
Operating voltage	200 ... 690 V
Overload class	10
Control supply voltage	110 ... 240 V AC/DC
Firmware version	V.6.2
Rated operational voltage	690 V AC
Frequency	50/60 Hz
Protection class	IP00
Ambient temperature	-25 ... +60 °C
Communication interface	PROFIBUS DP / Modbus RTU
Rated operational current Ie	12-840 A
Rated operational current	12-840 A

Summary

Preface

Brief description

Outlines the purpose and content of the Getting Started document.

Requirements

Specifies the prerequisites and necessary knowledge for using the library.

Conventions

Explains designations used for software interface elements.

Software required

Lists software components needed to run the example project.

Hardware required

Details hardware components necessary for setting up the example project.

Security Information

Introduction

Introduction

Explains the basic principles of using the Library Soft Starter 3RW44.

Getting Started

Installation

Guides through the installation process of the Soft Starter library components.

HW-Config

Details how to configure hardware settings for the Soft Starter device.

CFC

Explains how to use the CFC-Editor and instantiate the Soft Starter template.

Operator Station

Describes block icons and faceplates for the Soft Starter in the Operator Station.

References

More information

Provides a list of related documentation and resources for further study.

List of Abbreviations

Abbreviations

Defines common abbreviations used throughout the document.