Siemens 6ES7 414-5HM06-0AB0

Synchronization modules
Synchronization modules for
S7-400H
Equipment Manual
04/2020
A5E50072434-AA
Security information
1
Introduction
2
Safety notes
3
Description of the device
4
Assembling
5
Connecting up
6
Technical data
7
Approvals
8

Siemens 6ES7 414-5HM06-0AB0 Specifications

General

Brand	Siemens
Model	6ES7 414-5HM06-0AB0
Category	Control Unit
Language	English

Summary

Security information

Safety notes

Description of the device

4.2 Synchronization modules for S7-400 H

Explains the function of synchronization modules for the S7-400H system.

Diagnostics behavior of the synchronization link

Assembling

5.1 Safety notices for installation

Important safety instructions to be observed during the installation process.

5.2 Selecting fiber-optic cables

Criteria and rules for choosing suitable fiber-optic cables based on application needs.

Specification of fiber-optic cables for indoor applications

Specification of fiber-optic cables for outdoor applications

5.4 Wiring and inserting the synchronization module

5.6 Installation of fiber-optic cables

Points to observe when installing fiber-optic cables

Connecting up

6.1 Safety when connecting up

Essential safety precautions that must be followed when connecting the device.

Safety notices on use in hazardous areas

Safety guidelines for connecting the device within hazardous or explosive environments.

Safety notices for use according to ATEX and IECEx

Specific safety requirements for connecting the device under ATEX and IECEx conditions.

Technical data

Technical specifications

Presents detailed technical specifications for the synchronization modules, including parameters and performance data.