To Next PageTo Next Page
Need help?Do you have a question about the Siemens 6ES7131-4BD01-0AA0 and is the answer not in the manual?
General| Product Type | Digital input module |
|---|---|
| Supply voltage | 24 V DC |
| Number of Inputs | 4 |
| Digital inputs Number of inputs | 4 |
| Input Voltage | 24 V DC |
| Type of input voltage | DC |
| Input current at input 1, typ. | 7 mA |
| Cable length, shielded, max. | 1000 m |
| Cable length unshielded, max. | 600 m |
| Number of outputs | 0 |
| Interrupts/diagnostics/status information | No |
| Alarms | No |
| Diagnostics function | No |
| Potential separation between the channels and backplane bus | Yes |
| Isolation tested with | 500 V DC |
| Width | 15 mm |
| Height | 81 mm |
| Depth | 52 mm |
| Product brand name | SIMATIC |
| Response Time | 3 ms |
| Input delay (for rated value of input voltage) | 3 ms |
| Connection Technology | Screw terminal |
Explains the manual's objectives and supplementary nature to other operating instructions.
Outlines the prerequisite general knowledge of automation engineering needed to understand this manual.
Defines the manual's applicability to the ET 200S module and its content validity.
Provides guidance on environmentally compliant recycling and disposal of the ET 200S module.
Lists resources for further assistance, including Siemens representatives and online portals.
Details the specific technical features and characteristics of the 4DI DC24V ST module.
Describes the terminal assignments for the 4DI DC24V ST module and related notes.
Lists and illustrates the various usable terminal modules compatible with the 4DI DC24V ST.
Presents the block diagram illustrating the internal structure of the 4DI DC24V ST module.
Provides key technical specifications including dimensions, weight, and module-specific data.
Details electrical characteristics such as supply voltage, isolation, and current consumption.
Explains how to interpret the LED display for status and diagnostic information.
