Need help?Do you have a question about the Siemens 6ES7134-6HB00-0CA1 and is the answer not in the manual?
General| Supply voltage | 24 V DC |
|---|---|
| Analog inputs | 4 |
| Weight | 40 g |
| Module format | ET 200SP |
| Protection class | IP20 |
| Cable length, shielded | 100 m, max. |
| Resolution | 16 bits |
| Basic accuracy | +/- 0.3 % |
| Connection method | Push-in terminal |
| Input current | Typically 45 mA |
| Power loss | 1.1 W |
| Isolation | 500 V DC |
Shows measurement types and their respective measuring ranges supported by the module.
Lists and explains the configurable parameters for the analog input module.
Describes diagnostic and hardware interrupts generated by the module.
Product designation, firmware version, and BaseUnit compatibility.
Details functions like I&M data, Isochronous mode, and scalability.
Details the structure of data records and parameter assignment in the user program.
To Next Page