Siemens 6SL3225-0BE35-5AA0 User Manual

Technical specifications
7.3 General data
PM250 Power Module
56 Hardware Installation Manual, 01/2016, A5E36265179B-AA
7.3
General data
Property
Version
Line voltage
3-phase 380 … 480 VAC ± 10%
Output voltage
3-phase 0 VAC … input voltage x 0.87 (max.)
Input frequency
50 Hz … 60 Hz, ± 3 Hz
Output frequency
0 … 550 Hz, depending on the control mode
Power factor λ
0.9
Inrush current
< LO base load input current
Pulse frequency (factory
setting)
4 kHz
The pulse frequency can be adjusted up to 16 kHz in 2 kHz steps. The higher the pulse
frequency, the lower the available output current.
Current derating depending on the pulse frequency (Page 60)
Electromagnetic compatibili-
ty
The devices comply with EN 61800-3: 2004 suitable for Category C2 and C3 environments.
Braking methods
DC braking, energy recovery (up to 100% of the output power)
Degree of protection
IP20 built-in devices (they must be installed in an electrical cabinet)
Environmental conditions for transport in the transport packaging
Climatic environmental
conditions
The device is suitable for temperatures that conform with 2K4 according to EN 60721-3-2 in
the range -40° … +70° C
Mechanical environmental
conditions (shocks and
vibrations)
The device is suitable for operation in mechanical environmental conditions that conform
with 2M3 according to EN 60721-3-2
Protection against chemical
substances
The device is protected against damaging chemical substances that conform with 2C2 ac-
cording to EN 60721-3-2
Biological environmental
conditions
The device is suitable for operation in biological environmental conditions that conform with
2B2 according to EN 60721-3-2
Environmental conditions for long-term storage in the product packaging
Climatic environmental
conditions
The device is suitable for temperatures that conform with 1K4 according to EN 60721-3-1 in
the range -25° … +55° C
Mechanical environmental
conditions (shocks and
vibrations)
The device is suitable for operation in mechanical environmental conditions that conform
with 1M2 according to EN 60721-3-1
Protection against chemical
substances
The device is protected against damaging chemical substances that conform with 1C2 ac-
cording to EN 60721-3-1
Biological environmental
conditions
The device is suitable for operation in biological environmental conditions that conform with
1B2 according to EN 60721-3-1
Environmental conditions during operation
Installation altitude
Restrictions for spe-
cial ambient conditions
(Page 61)
without derating:
with derating:
up to 1000 m above sea level
up to 4000 m above sea level

Siemens 6SL3225-0BE35-5AA0 Specifications

General

Brand	Siemens
Model	6SL3225-0BE35-5AA0
Category	Inverter
Language	English