Procedure
1. Mount the device.
Installation (except level) (Page 27)
Installation (level) (Page 30)
2. Connect the device.
Connecting the device (Page 41)
3. Switch on the power supply.
Switching on the supply voltage (Page 46)
4. Open the cover of the buttons:
5. Further functions can be found in the operating instructions.
– Set the measuring range.
– Set the pressure unit.
– Set the application of your device.
– Set the scaling points.
– Set the zero point.
– Lock the device.
– Enable Functional Safety (for devices with Functional Safety).
Getting started
1.2 Commissioning the device with display
SITRANS P320/P420 with 4 to 20 mA/HART
Compact Operating Instructions, 09/2018, A5E38874562-AB 9
To Next Page
Loading...
