Siemens A62 User Guide

S
iemens AG 2004, \\Fileserver\users\Siemens MP\Dorado\E2\Dorado_Main.fm
left page (2) of A70 Dorado, 140mm, en2, A31008-H2770-M7-3-RC19 (28.06.2005, 11:44)
Getting started
2
VAR Language: en2; VAR issue date: 050331
Getting started
Using the SIM card/battery
Your phone's display is delivered with a
protective film. Remove this film before get-
ting started. The service provider supplies
you with a SIM card on which all the im-
portant data for your account is stored. If
the SIM card is credit card-sized, snap out
the smaller segment and trim any rough
edges.
Remove the battery cover upwards
1.
Insert SIM card
2 and push it fully into
the locating slot (make sure the angled
corner is in the correct position
3
). Then
push the retaining catch over the top of
the SIM card
4
.
Insert the battery sideways into the
phone
5
, then press downwards
6
until it engages.
To remove, press the retaining tab
7
then lift the battery out.
Insert the battery cover by the tabs at the
bottom
8
, then press downwards
9
,
until it engages.
Always switch off phone before removing
the battery!
Only 3V SIM cards are supported. Please
contact your service provider if you have
an older card.
Charge battery
The battery is not fully charged when de-
livered. Plug in the charger cable at the
bottom of the phone, plug in the power
supply unit to the mains power socket
and charge for at least two hours.
1
2
4
3
6
7
5
8
9
A70 ct-e2, A31008-H2770-M7-3-RC19A70 ct-e2, A31008-H2770-M7-3-RC19

Siemens A62 Specifications

General

Brand	Siemens
Model	A62
Category	Cell Phone
Language	English