EasyManuals Logo

Siemens A62 User Guide

Siemens A62
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
right page (3) of A70 Dorado, 140mm, en2, A31008-H2770-M7-3-RC19 (28.06.2005, 11:44)
Siemens AG 2004, \\Fileserver\users\Siemens MP\Dorado\E2
\Dorado_Main.fm
3
Switch on/off, PIN entry
VAR Language: en2; VAR issue date: 050331
Charging time
The charging time is 2 hours. Ambient
temperature of 5 °C to 40 °C (icon flashes
as a warning when 5 °C above/below this).
Switch on/off, PIN entry
Switch on/off
Press and hold On/Off/End keyBto
switch on or off.
Enter PIN
The SIM card can be protected with a
4 - 8 digit PIN. Enter the PIN code using
the number keys (the display shows a se-
ries of asterisks, if you make a mistake
press
§Clear§). Confirm your input with §OK§.
Logging on to the network will take a few
seconds.
First time switching on phone, the time
and date must be set.
Standby mode
When the name of the service provider/
logo appears on the display, the phone is
in standby mode and ready for use.
Press and hold the On/Off/End key
Bto
return to standby mode from any menu
option.
Security
The phone and SIM card are protected
against misuse by several security codes.
Keep these confidential numbers in a safe
place where you can access them again if
required.
§Menu§ ¢ Setup ¢ Security ¢ Codes
¢ Select a function.
PIN control
The PIN is usually requested each time
the phone is switched on. You can deacti-
vate this feature but you risk unauthor-
ised use of the phone. Some service pro-
viders do not permit deactivation of the
control.
Change PIN
You can change the PIN to any 4 - 8 digit
number you may find easier to remember.
Change PIN2
(Displayed only if PIN 2 is available.)
Proceed as with Change PIN.
Change phonecode
You define and enter the phone code
(4 - 8 digits) when calling a phone code
protected function (e.g. Direct call, p. 4)
for the first time. It is then valid for all
protected functions. If it is entered incor-
rectly three times the phone is locked.
Contact the Siemens Service.
Clear SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter the
PUK (MASTER PIN) provided by your serv-
ice provider with the SIM card. If the PUK
(MASTER PIN) has been lost, please con-
tact your service provider.
Prevent accidental activation
Even if PIN use is deactivated (p. 3) con-
firmation is required to switch on the
phone.
This prevents accidental activation of the
phone, e.g. when you are carrying it in a
bag or when you are travelling in an
aircraft.
After pressing and holding the On/Off/End
key
B
select §OK§ to switch on the phone
or abort the operation with
§Cancel§.
Making a phone call
Dialling with number keys
The phone must be switched on (standby
mode). Enter the number (always with
prefix, if necessary with the international
dialling code). Press
§Clear§ to clear the last
digit, press and hold to clear the entire
phone number. To dial press the
Akey.
A70 ct-e2, A31008-H2770-M7-3-RC19A70 ct-e2, A31008-H2770-M7-3-RC19

Other manuals for Siemens A62

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens A62 and is the answer not in the manual?

Siemens A62 Specifications

General IconGeneral
BrandSiemens
ModelA62
CategoryCell Phone
LanguageEnglish

Related product manuals