Siemens AGM60.4A9 - Page 245

245/248
Building Technologies Division Basic Documentation LMV36... CC1P7544en
Infrastructure & Citiies Sector 25.09.2013
Software version V03.40
 Extension: Supports SQM33.6 or SQM33.7
 Extension: Purging in the lockout position
 Optimization: Shutdown of VSD control when burner flange / safety loop is open
 Optimization: Minimum setting for prepurge time: 5 seconds
 Optimization: Standstill supervision of the VSD can be switched off in standby mode
 Extension: No flame at the end of safety time TSA repetition counter, adjustable air
pressure failure (OEM), heavy oil direct start (SO)
 Extension: Air pressure supervision in operation with pneumatic ratio control can be
switched off (OEM)
 Extension: VSD ramp time increased to 40 seconds
 Extension: Modbus data points
127 = Fuel 0 operating mode (parameter 201)
128 = Fuel 1 operating mode (parameter 301)