Siemens AGM60.4A9 - Standards and Certifications

3/30
Smart Infrastructure CC1N7544en
21.05.2021
Standards and certificates
Applied directives:

Low
-
voltage directive
2014/35/EU

Directive for pressure devices
2014/68/EU

Gas Applia
nces Regulation (EU)
(EU) 2016/426

Electromagnetic compatibility EMC (immunity) *)
2014/30/EU
*) The compliance with EMC emission requirements must be checked after the burner management
system is installed in equipment
Compliance with the regulations of the applied directives is verified by the adherence to
the following standards / regulations:
 Automatic burner control systems for burners and appliances
burning gaseous or liquid fuels
DIN EN 298
 Safety and control devices for gas burners and gas burning
appliances - Valve proving systems for automatic shut-off
valves
DIN EN 1643
 Gas/air ratio controls for gas burners and gas burning
appliances
Part 2:
Electronic types
DIN EN 12067-2
 Safety and control devices for gas burners and gas burning
ap
pliances
DIN EN 13611
 Safety and control devices for gas burners and gas-burning
appliances - Particular requirements
Part 1:
Automatic and semi
-
automatic valves
ISO 23552-1
 Automatic electrical controls for household and similar use
Part 2-5:
Particular requirements for automatic electrical burner control
systems
DIN EN 60730-2-5
The relevant valid edition of the standards can be found in the declaration of
conformity!

Note on EN 60335-2-102
Household and similar electrical appliances – Safety
Part 2-102:
Particular requirements for gas, oil and solid-fuel burning appliances having electrical
connections. The electrical connections of the LMV36 and the AGM60 comply with the
requirements of EN 60335
-
2
-
102.
EAC Conformity mark (Eurasian Conformity mark)
ISO 9001:2015
ISO 14001:2015
OHSAS 18001:2007
China RoHS
Hazardous substances table:
http://www.siemens.com/download?A6V10883536