Siemens ARTIS 2 P - User Manual

Questions and Answers

R
Richard AguirreAug 11, 2025
Why is my Siemens ARTIS 2 P not working?
- J
  Joshua NortonAug 11, 2025
  Your Siemens Hearing Aid might not be working due to several reasons: it might not be turned on, the battery compartment may not be completely closed, the battery may be dead, the battery polarity may be reversed, or the power-on delay may be active. Try turning on the instrument, ensuring the battery compartment is closed properly, replacing the battery, reinserting the battery with the correct polarity, or waiting for the power-on delay to complete.
S
sullivantiffanyAug 17, 2025
How to fix weak sound in Siemens ARTIS 2 P Hearing Aid?
- J
  Janet MendozaAug 17, 2025
  If the sound from your Siemens Hearing Aid is weak, it could be due to a weak or dead battery, a clogged earmold, or the volume being too low. Try replacing the battery, clearing the earmold, or increasing the volume.
A
Ana RodriguezAug 23, 2025
What to do if my Siemens Hearing Aid emits whistling sound?
- T
  Troy SalinasAug 23, 2025
  If your Siemens Hearing Aid is emitting a whistling sound, it could be due to improper seating in the ear, the volume being too high, or a blockage of wax. Try reseating the instrument in your ear, reducing the volume, or clearing the wax from the instrument or your ears.
D
Dawn TrevinoAug 29, 2025
Why is the sound distorted on my Siemens ARTIS 2 P?
- M
  Mary ThomasAug 29, 2025
  Sound distortion in your Siemens Hearing Aid can occur if the volume is too high or the battery is weak. Try reducing the volume or replacing the battery.
K
Kathy ColemanSep 4, 2025
What to do if Siemens ARTIS 2 P Hearing Aid emits signal tones?
- J
  John CaseySep 4, 2025
  If your Siemens Hearing Aid is emitting signal tones, it could be because the battery compartment is not completely closed or the battery is weak. Ensure the battery compartment is closed properly or replace the battery.