What to do if my Siemens CIELO 2 ACTIVE Hearing Aid does not work?
If your Siemens Hearing Aid isn't working, there are several potential causes. First, ensure that the instrument is turned on and that the battery compartment is completely closed. Next, check the battery; it might be dead or the polarity might be reversed. Finally, the power-on delay might be active; wait for it to finish.
What to do if my Siemens CIELO 2 ACTIVE Hearing Aid sound is weak?
If the sound from your Siemens Hearing Aid is weak, there could be several reasons. First, the battery might be weak or dead, so try replacing it. Second, the instrument, dome, or microphone cover might be clogged; in this case, clean the respective part. Finally, the volume might be too low; try increasing it.
Why does my Siemens Hearing Aid emit a whistling sound?
Your Siemens Hearing Aid might be whistling due to a few reasons. It could be improperly seated in your ear; try re-seating it. The volume might be too high; try lowering it. Also, your ears or the instrument might be clogged with wax; ensure both are clean.
Why is the sound distorted on my Siemens CIELO 2 ACTIVE?
Distorted sound in your Siemens Hearing Aid can stem from several causes. The volume might be too high, so try lowering it. A weak battery can also cause distortion, so replace it if necessary. Additionally, the dome might not be mounted correctly or cerumen has built up on it; remount the dome or clean it, respectively.
General| Brand | Siemens |
|---|---|
| Model | CIELO 2 ACTIVE |
| Category | Hearing Aid |
| Language | English |
To Next Page
