Siemens AS18H User Manual

9
AS180 - AS280 / IM-Nord EN / A31008-M2002-R201-1-9W19 / main.fm / 31.03.2010
Assigning key 1 for fast access to the
network mailbox
Simply press and hold key 1 on the handset and you
will be connected directly to the network mailbox.
See Menu tree
¢ page 13.
Locating a handset
("paging")
You can locate your handset using the base station.
◆ Briefly press the registration/paging key on the
base station (
¢ page 1).
◆ All handsets will ring simultaneously ("paging"),
even if the ringer tones are deactivated.
End paging: briefly press
the r
egistration/paging key
on the base station (
¢ page 1) or the talk key c on
a handset.
Registering handsets
You can register up to four handsets on your base sta-
tion (Gigaset AS18H/AS28H) recommended).
For automatic registration of handsets to
Gigaset AS180/AS280
¢ page 5.
Manual registration of handsets to
Gigaset AS180/AS280
1. On the handset: MENU ¢ Settings ¢ OK
¢ Handset ¢ OK ¢ Register HS ¢ OK ¢ Enter
the system PIN of the base station (default is 0000)
¢ OK.
Registering flashes in the display.
2. On the base station: wit
hin 60 seconds of entering
the system PIN, press and hold the registration/pag-
ing key (
¢ page 1) (min. 3 seconds).
Registration takes approx. 1 minute.
De-registering handsets
Handsets can only be de-registered by resetting the
base station to its default settings. This will also reset
other settings
¢ page 10.
If you have only re
gistered handsets for other GAP-
compatible devices, these can only be de-registered
with a hardware reset
¢ page 10.
Using several handsets
Making internal calls
Internal calls are free calls to other handsets that are
registered to the same base station.
To make a call to other handsets, press
◆ INT ¢ ~ (1...4, enter internal number of the
handset), the handset is called or
◆ INT ¢ star key P, all handsets are called.
When a participant answers you can speak to them.
To
end the call, press the end call key
a.
Internal consultation call/connecting
a call
You are in conversation with an external participant.
Press the
INT key and call one or all handsets. The
external participant hears the hold music.
◆ Before the internal participant has answered,
press the end call key
a; the call is diverted to the
participant who answers the call.
◆ After the internal participant has answered, you
can talk to him. Press the end call key
a; the call is
diverted, or press the display key
”; you are
reconnected to the external participant.
Listening in to an external call
You are conducting an external call. An internal par-
ticipant can listen in on this call and take part in the
conv
ersation (conference).
Precondition: Th
e
Listening in function must be acti-
vated.
Activating/deactivating listening in
MENU ¢ Settings ¢ OK ¢ Base ¢ OK
¢ Listening in ¢ OK (‰ = on)
Internal listening in (conference)
You want to listen in to an existing external call.
Press and hold the
c key. You can listen in to the call.
All participants hear a signal tone.
To end:
press the end call key
a. All participants hear
a signal tone.
If the fir
st internal participant presses the end call key
a, the handset that has "listened in" remains con-
nected to the external participant.
Please note:
Each additional handset must be registered on the
ba
se station in order for it to work properly!

Siemens AS18H Specifications

General

Brand	Siemens
Model	AS18H
Category	IP Phone
Language	English