Siemens BACnet Installation Instructions

Document No. 570-136
Installation Instructions
October 26, 2016
Page 2 of 11 Siemens Industry, Inc.
Product Numbers
Fume Hood Controller
Applications 6740,6741,6742
This controller requires Offboard
Air Module(s) (ordered and
shipped separately
570-00701PKA
Offboard Air Module – two
required, order separately
550-819B
Operator Display Panel II (ODP II)
575-820A
Power Module
AQM2200
Siemens fast-acting Lab Electronic
Actuator(s) – order and ship
separately)
GNP191.1U
Shipping carton includes a controller assembly, a
mounting rail, and two self-tapping/drilling screws.
CAUTION
Keep the unit in its static-
proof bag until installation.
Otherwise you run the risk of
damage to the PCA from
electrostatic discharge.
ATTENTION
Ne pas retirer la carte de son
emballage avant son
installion.
Autrement, une décharge
électrostatique peut
endommager la carte
équipée.
Accessories
Room Sensor Cable 25 ft.
Room Sensor Cable 50 ft.
588-100A
588-100B
Vertical Sash Sensor
50 inch range
80 inch range
546-04000
546-04001
Parts for Smoke Control Compliance
Smoke Control Listed Large
Equipment Controller Enclosure
(Long board and ATEC
controllers).
550-002K
UL Listed Class 2 transformer with
120/240/277/480 Vac 50/60 HZ
0.5A primary with hub, and 24 Vac
96VA secondary w/ hub and circuit
breaker.
TR100VA004
NOTE:
For smoke control application, primary
rating is only 120V/60 Hz.
Warning/Caution Notation
WARNING
Personal injury/loss of life may
occur if you do not follow the
procedures as specified.
CAUTION
Equipment damage or loss of
data may occur if you do not
follow the procedures as
specified.
AVERTISSMENT
Risques de blessures graves
ou mortelles, si vous ne suivez
pas les procédures indiquées.
ATTENTION
Risques de dommages ou de
pertes de données, si vous ne
suivez pas les procédures
indiquées.

Siemens BACnet Specifications

General

Brand	Siemens
Model	BACnet
Category	Controller
Language	English