en Installation instructions
26
Remove the feet.
18.6 Installation in a tall unit
Observe the installation dimensions and the safety
clearances in a tall unit.
Do not fit the appliance too high up; it must be pos-
sible for accessories to be removed easily.
Fit the feet.
18.7 Installing the appliance
1.
Push the appliance in fully.
Do not kink or trap the connection cable, or route it
over sharp edges.
2.
Check the clearance to the adjacent appliances.
3.
ATTENTION!
When opening the appliance door, the appliance
may tilt forwards.
▶ Hold the appliance in position when opening the
appliance door.
Open the appliance door slowly.
To Next Page
Loading...
Need help?
General
