Siemens BF722L1B1 - Page 27

Installation instructions en
27
4.
Screw the appliance to the unit on the opposite side
to the hinges.
5.
Pre-drill the screw holes in the unit on the side with
the hinges.
Cover the door hinges.
Use a wood drill with a 2 mm diameter.
6.
Remove any shavings from the cooking compart-
ment.
7.
Screw the appliance to the unit on the side with the
hinges.
8.
Remove any packaging material and adhesive film
from the cooking compartment and the door.
18.8 Removing the appliance
1.
Disconnect the appliance from the power supply.
2.
Undo the fastening screws.
3.
Lift the appliance slightly and pull it out completely.