BT 200 04/00 English
(S)J31069-D0075-U001-A2-6318 Page 19
Memory full
This display appears when the maximum
number of tests to be stored is reached.
After you confirm with OK, the last selected
identifier appears which you can then
overwrite.
This identifier cannot be changed. The last
test result is overwritten.
Transferring tests to a PC
The test data are stored in non-volatile me-
mory (i.e., they can be transferred to the PC
even after the BT 200 is turned off).
Before starting the transmission to the PC,
connect the included "log" cable to a COM
interface of the PC and to the 9-pin sub D
socket of the BT 200.
The transmission is activated with the
SERVICE menu and indicated on the dis-
play.
Communication can be terminated with the
ESC key. The following display appears.
OK terminates communication.
ESC terminates "termination" of communi-
cation.
Deleting the test data
The test data can be deleted with the
SERIVCE menu.
To Next Page
Loading...
