To Next PageTo Next PageHow to fix a Siemens BT 200 Test Equipment with no display after switching on?
If your Siemens Test Equipment shows no display after you switch it on, the battery might be dead. Try charging the battery or installing a new one.
What to do if my Siemens Test Equipment keeps turning off?
If your Siemens Test Equipment turns off unexpectedly, the battery might be dead. In this case, charge the battery or install a new one.
Why does my Siemens Test Equipment turn off automatically?
Your Siemens Test Equipment might be turning off automatically because the time with no user activity was exceeded. Press the ON/OFF button to resolve this.
What to do if my Siemens BT 200 shows an "internal error" message after switch-on?
If your Siemens Test Equipment displays an "internal error" message after being switched on, it could be due to a RAM/EPROM error, a defective display, or a faulty keyboard. Replace the BT 200 to fix this.
How to repair a Siemens BT 200 with a defective internal driver?
If the internal driver of your Siemens Test Equipment is defective, it is due to a hardware defect. Replace the BT 200.
General| Brand | Siemens |
|---|---|
| Model | BT 200 |
| Category | Test Equipment |
| Language | English |
Explains the primary function of the BT 200 device.
Details additional functions and features of version 2.
Lists the items included in the BT 200 package.
Instructions on how to charge the BT 200 battery.
Shows initial device startup displays including standby and battery status.
Details the main screen and automatic power-off feature.
Explains the wiring test concept and provides a step-by-step guide.
Details error messages for station tests, wire mix-ups, and short circuits.
Covers error messages for broken wires or shield connections.
Explains device navigation and cursor functionality in specialist mode.
Instructions for conducting the RS 485 test and understanding its results.
Steps to perform the branch test for bus availability.
Details the results of the branch test and potential issues.
Procedure for measuring line distances and interpreting results.
Guide to executing the reflection test and interpreting its outcomes.
Describes configurable settings and data transmission activation.
Details information shown and the internal hardware testing.
Explains the process and necessity of calibration for measurements.
Instructions on how to save and manage performed tests with identifiers.
Handles full memory scenarios and transferring data to a PC.
Explains how to erase stored test data from the device.
Demonstrates testing the entire PROFIBUS-DP system without the master.
Shows how to perform wiring tests on connected stations without removal.
Illustrates wiring tests using a repeater's PG socket.
Demonstrates testing a segment with a repeater and terminator.
Covers checking battery charge and instructions for battery replacement.
Details the internal RS 485, RAM, and Flash EPROM diagnostic tests.
Lists errors occurring during startup and their corresponding solutions.
Details errors occurring during operation and their correction methods.
Information on ordering test connectors and the log kit.
Details for ordering replacement chargers and batteries.
Information on ordering specific test cables for station testing.
Provides general device specs, environmental requirements, and EMC guidelines.
Outlines physical requirements, vibration/shock, and device certifications.
