43Setup
right page (43) of C75 Aries, w/o ptt, SUG, 140mm, en A31008-H6970-A1-2-7619 (24.09.2005,
© Siemens AG 2003, E:\Auftrag\Siemens\MobilePhones\C75 Aries V2\en\KA\S_Aries_Setup.fm
Template: X75, 140x105, Version 2.2; VAR Language: en; VAR issue date: 050718
Phone Pilot b
C
¢T¢Phone Pilot
¢Select function.
Your Phone Pilot accompanies you
with instructions for many actions
you can perform with your phone. It
reminds you of important deadlines
or birthdays.
A Phone Pilot is in the phone by de-
fault and cannot be deleted.
Activate/deactivate
Off You can deactivate Phone
Pilot function.
Standard Select the included
"standard figure".
If you have additional figures down-
loaded, you can also install, activate,
or delete them:
I Select entry.
C
Activate.
Install
You can download additional figures
on the Internet.
I
Select entry in the list or
Inbox.
J
When installing a new
Phone Pilot you can give it
its own name.
§Yes§ Activate.
Call setup
C
¢T¢Call setup
¢Select function.
Hide ID b
If activated, your phone number will
not appear on the other party’s dis-
play (depending on the service
providers).
Call waiting b
If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it.
Divert
You can specify when calls should be
diverted to your mailbox or other
numbers.
Set up call divert (example)
Unanswered
b
I
Select Unanswered.
(Includes the conditions
Not reachable, No reply,
Busy, see below.)
C
Confirm and select Set,
then enter the phone
number to which the call
will be diverted.
§OK§ Confirm. The network set-
ting confirms.
To Next Page
Loading...
