Siemens C75 - Page 47

Setup46
© Siemens AG 2003, E:\Auftrag\Siemens\MobilePhones\C75 Aries V2\en\KA\S_Aries_Setup.fm
left page (46) of C75 Aries, w/o ptt, SUG, 140mm, en, A31008-H6970-A1-2-7619 (24.09.2005,
Template: X75, 140x105, Version 2.2; VAR Language: en; VAR issue date: 050718
Connectivity
C
¢T¢Connectivity
¢Select function.
GPRS b
(General Packet Radio Service)
GPRS is a new method for transmit-
ting data faster in the mobile net-
work. Symbols in the display,
see page 6.
GPRS info
Display connection information.
IrDA
Your phone has an infrared inter-
face. The distance between the two
devices must not exceed 30 cm. The
infrared windows in both appliances
must be aligned as accurately as pos-
sible with each other. Symbols in the
display, see page 6.
Data services
Default setting and activation of the
connection profiles for the applica-
tions MMS, WAP. The phone default
setting varies from service provider
to service provider: You will receive
any data necessary from the service
provider or via the "Setting Configu-
rator" at:
www.siemens.com/
mobilephonescustomercare
HTTP profile
The phone default setting varies
from service provider to service pro-
vider. Consult your service provider
or go to this address in the Internet
for more information
www.siemens.com/
mobilephonescustomercare
Authentication
Activate or deactivate encrypted
WAP dial-up (CSD connections only).
Fax/data
Send voice/fax b
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
Rec. voice/fax
b
Start the required communication
program on your PC and select the
function on the phone during the
call (the PC will take over the
connection).
Rec. fax/data
b
The call is signalled by a special ring-
tone and the type of call (fax or data)
is displayed. Now start the commu-
nication program in your PC to re-
ceive the fax/data.