Company Confidential Siemens Com
Copyright 2005© Siemens AG
7. Key shielding Disassembly
Remove side key coppers.
Lift both side key portions sticking on
the shielding.
Separate both side keys and shielding
carefully. Don’t lift side key horizontally
, which may cause inner trace broken.
Create gap between keypad shielding
and metal dome from bottom.
Tape glue is under all keypad
shielding. Separate keypad shielding
and metal dome carefully.
Dismount keypad shielding. Don’t lift
side key horizontally, which might cause
inner trace broken.
Page 18 of 21
Service Repair Documentation
Level 2 – CL75
To Next Page
Loading...
