Siemens CL75 - Managing calls and conferences

Company Confidential Siemens Com
Copyright 2005© Siemens AG
10. Water Indicator
To identify if the mobile is moistened, a water indicator is stuck on IO connector.
When the moisture is over the standard, the background of the label will be turn from
white to pink and the spots pattern will become blurred.
Water indicator ( sticked on the IO connector)
Water indicator ( can be seen through the base
case )
 The position of the Water-Indicator had been defined the way that it is
possible to read out the status of the water-Indicator within level0.In
case that a walk-in shop has been used as service-channel; the end
customer shall be confronted directly – if colour of Water-Indicator
has turned to pink! In a further step the main board shall be checked
for any signs of oxidation. The result shall be used as proof of
evidence towards the end customer. In that case the mobile phone
shall not be accepted as in-warranty, but shall be considered as
Dama
g
e Caused b
y
customer.
Page 21 of 21
Service Repair Documentation
Level 2 – CL75