Company Confidential Siemens Com
Copyright 2005© Siemens AG
Introduction
This Service Repair Documentation is intended to carry out repairs on Siemens
repair up to level 2. The described failures shall be repaired in Siemens authorized
local workshops only.
All repairs have to be carried out in an ESD protected environment and with ESD
protected equipment/tools. For all activities the international ESD regulations have to be
considered.
Assembling/disassembling has to be done according to the latest CL75 Level 2 repair
documentation. It has to be ensured that every repaired mobile Phone is checked
according to the latest released General Test Instruction document (both documents
are available in the Technical Support section of the C-market).
Check at least weekly C-market for updates and consider all CL75 related Customer
Care Information
If you have any questions regarding the repair procedures or technical questions
spare not hesitate to contact our technical support team in Kamp-Lintfort, Germany:
Tel.: +49 2842 95 4666
Fax: +49 2842 95 4302
e-mail: st-support@ klf.siemens.de
Page 3 of 21
Service Repair Documentation
Level 2 – CL75