6 Configuring the Climatix touch panel
You can configure the following Climatix touch panel settings:
● Screen brightness
● System date and time
● Network configuration
● Serial port test
● Language
To access the Settings mode:
1. Shut down the Climatix touch panel.
2. Manually set the DIP switches to the position 010.
3. Switch on the Climatix touch panel.
All settings are stored even if the Climatix touch panel is powered off.
6.1 Set screen brightness
Press Brightness, and adjust the screen brightness.
6.2 Set the time and date
Press Date / time and use + or - to set the date and time, and press Ok.
To Next Page
Loading...
