Siemens CM724G1 2 Series - Favourites; Basic Settings

Basic settings en
19
14 Basic settings
You can configure the basic settings for your appliance
to meet your needs.
14.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
You can find more information about the individual ba-
sic settings on the display using ⁠.
Basic settings Selection
Language See selection on the appliance
HomeConnect Connect the oven to a mobile end
device and remotely control it. Home
Connect →Page20
Clock Time in 24-hour format
Date Date in the format DD.MM.YYYY
Display Selection
Brightness ¡ Levels 1, 2, 3, 4 and 5
1
Standby
screen
¡ On for a limited time
¡ On (this setting increases energy
consumption)
¡ Off
1
Clock ¡ Digital + date
1
¡ Digital
¡ Analogue
Alignment ¡ Align the display horizontally and
vertically
1
Factory setting (may vary according to model)
Tone Selection
Button tone ¡ On
1
¡ Off
Audible signal ¡ Very short duration
¡ Short duration
¡ Medium duration
1
¡ Long duration
1
Factory setting (may vary according to model)
Device Set-
tings
Selection
Fan run-on
time
¡ Minimum
¡ Recommended
1
¡ Long
¡ Very long
Lighting ¡ On when cooking and opening
the door
1
¡ Only when the door is opened
¡ Always off
1
Factory setting (may vary according to model)
Device Set-
tings
Selection
Microwave out-
put presetting
¡ 90W
¡ 180W
¡ 360 W
¡ 600W
1
¡ Boost
Continue to
microwave
¡ On
¡ Off
1
1
Factory setting (may vary according to model)
Personalisa-
tion
Selection
Brand logo ¡ Indicators/symbols
1
¡ Do not display
Operation after
switch-on
¡ Main menu
1
¡ Types of heating
¡ Microwave
¡ Dishes
¡ Favourites
Elapsed cook-
ing time
¡ Displays
1
¡ Do not display
Microwave
baking tray
¡ On
1
¡ off
Dishes ¡ All
1
¡ No pork
¡ Kosher only
Regional
dishes
¡ All
1
¡ European dishes
¡ British dishes
Childproof
lock
¡ Keylock only
1
¡ Deactivated
1
Factory setting (may vary according to model)
Factory set-
tings
Selection
Factory set-
tings
¡ Restore
Appliance in-
formation
Appliance information
14.2 Changing the basic settings
1.
Press "Basic settings".
2.
Press the required basic settings area.
3.
Press the required basic setting.
4.
Press to select the required basic setting.
a The change is applied directly for most basic set-
tings.
5.
To change additional basic settings, use to go
back and select a different basic setting.
6.
To exit the basic settings, use to go back to the
main menu or switch off the appliance using ⁠.
a The changes are saved.
Note:Your changes to the basic settings will be re-
tained even after a power failure.