Preface
iv
PLC S7-300, CPU Specifications CPU 312 IFM to CPU 318-2 DP
A5E00111190-01
Scope of the Manual
The manual covers the following CPUs and Hardware/Software versions:
CPU Order No.
As of Version
Firmware Hardware
CPU 312 IFM 6ES7 312-5AC02-0AB0
6ES7 312-5AC82-0AB0
1.1.0 01
CPU 313 6ES7 313-1AD03-0AB0 1.1.0 01
CPU 314 6ES7 314-1AE04-0AB0
6ES7 314-1AE84-0AB0
1.1.0 01
CPU 314 IFM 6ES7 314-5AE03-0AB0
6ES7 314-5AE83-0AB0
1.1.0 01
CPU 314 IFM 6ES7 314-5AE10-0AB0 1.1.0 01
CPU 315 6ES7 315-1AF03-0AB0 1.1.0 01
CPU 315-2 DP 6ES7 315-2AF03-0AB0
6ES7 315-2AF83-0AB0
1.1.0 01
CPU 316-2 DP 6ES7 316-2AG00-0AB0 1.1.0 01
CPU 318-2 6ES7 318-2AJ00-0AB0 V3.0.0 03
This manual describes all modules that are valid at the time the manual is
released. We reserve the right to release product information for new modules or
new module versions.
Alterations from Previous Version
The following changes were made in the Structuring, CPU Data Manual, Order no.
6ES7398-8AA03-8BA0, Edition 2:
Now, this manual only contains the CPU description. For information on the
S7-300 structure and installation refer to the Installation Manual.
CPU 318-2 DP as of Firmware Version V3.0.0 behaves as DP Master according
to PROFIBUS DPV1.
Agreement for CPU 314IFM
The CPU 314IFM is available in 2 versions:
with slot for Memory Card (6ES7314-5EA10-0AB0)
without slot for Memory Card (6ES7314-5EA0x-0AB0)
All details in this chapter apply to both versions of CPU 314IFM, unless explicit
reference is made to differences between them.
To Next Page
Loading...
Need help?
General
