Siemens CPU 317-2 PN/DP - Parameterization

Technical data of CPU 31xC
6.6 Technical data of the integrated I/O
CPU 31xC and CPU 31x, Technical Data
6-38 Manual, 01/2006 Edition, A5E00105475-06
6.6.3 Parameterization
Introduction
You configure the integrated I/O of CPU 31xC with STEP 7. Always make these settings
when the CPU is in STOP. The generated parameters are downloaded from the PG to the
S7-300 and written to CPU memory .
You can also choose to change the parameters at SFC 55 in the user program (see the
Reference Manual
System and Standard Functions ). Refer to the structure of record 1 for
the respective parameters.
Parameters of standard DI
The table below gives you an overview of the parameters for standard digital inputs.
Table 6-7 Parameters of standard DI
Parameters Value range Default Range of efficiency
Input delay (ms) 0,1/0,5/3/15 3 Channel group
The table below gives you an overview of the parameters when using digital inputs as
interrupt inputs.
Table 6-8 Parameters of the interrupt inputs
Parameters Value range Default Range of efficiency
Interrupt input Disabled /
positive edge
De-activated digital input
Interrupt input Disabled/
negative edge
De-activated digital input






,QWHUUXSWLQSXW',
,QWHUUXSWLQSXW',
,QWHUUXSWLQSXW',
,QWHUUXSWLQSXW',
,QWHUUXSWLQSXW',
,QWHUUXSWLQSXW',
,QWHUUXSWLQSXW',
,QWHUUXSWLQSXW',
,QWHUUXSWLQSXW',
%\WHUHVHUYHUG
GHDFWLYDWHG
ULVLQJHGJH
'HIDXOWVHWWLQJ
%\WH
%\WH
%\WH
%LW1U
%LW1U
%LW1U