CM1N9270en_06
2014-06-11
Building Technologies
Desigo™ PX
BACnet router for
• BACnet/IP
• BACnet/LonTalk
• BACnet MS/TP
PXG3.L
PXG3.M
· Routing between BACnet/IP , BACnet/LonTalk (PXG3.L only),
and BACnet MS/TP
· Supports BACnet/IPv4 and BACnet/IPv6
· Compliant with ANSI/ASHRAE 135-2012 Annex J
· Compliant with ISO 16484-5
· BTL label (BACnet communications passed the BTL test)
· Support for BBMD (BACnet Broadcast Management Device)
· Support for Foreign Device
· Configuration via Xworks Plus or Web browser (via IPv4)
· Access to network statistics via Web browser
· Firmware update via Ethernet and USB Device
· LED indication for Ethernet link and activity
· LED indication for BACnet/LonTalk and BACnet MS/TP (diagnostics)
· 2-port Ethernet switch for low-cost cabling (10/100 baseT)
· BACnet MS/TP (RS-485) baud rates: 9600, 19200, 38400, 76800, 115200
· Plug-in screw terminal blocks for supply, LONWORKS, and MS/TP
· RJ45 plug for PXM20 (LONWORKS)
· Operating voltage: AC 24 V or DC 24 V
· DIN rail mounting
· BACnet MS/TP Slave Proxy
· SNMP (v2), MIB-2
· BACnet NAT