Siemens DigiTRON Series User Manual

Document No:
IOM-002
Issue Date:
24/09/2020
Revision:
6
Page:
2 of 42
Unrestricted
Foreword
Thank you for purchasing a Siemens Energy Subsea product. The information contained in this
document is an overview including the protection, storage, shipment, unpacking, deployment and
maintenance for DigiTRON connector product range.
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Revision Summary
This page records the revision status of the entire document and its authorisation for issue.
Copyright © 2020 Siemens Energy Subsea Connectors, (a division of Siemens Energy plc),
Subsea Excellence Centre, Ulverston, Cumbria, LA12 9EE, England.
Rev
Compiled
by
Date
Approved
by
Issue Date
Page(s) Affected/Remarks
6
R Wyatt
26.06.2020
E Chaize
26.06.2020
Updated onto new IOM template with product
safety advice clearly identified.
DigiTRONe and DigiTRON3 added.
Section on Caps and Dummies added.
Alternative test connector added (from IOM-002-
CAM, so this IOM can be obsoleted).
5
R Wyatt
21.02.2020
J.Hardisty
21.02.2020
Safety warning added regarding differential
pressure rated products not to be used for fixed
pressure vessel installations.
4
P.Westwell
27.11.14
B.Leach
27.11.14
Misalignment tolerances updated, section 5
warning note added.
3
P.Westwell
29.4.2014
B.Leach
29.4.2014
New design cover and complete document
reformat.
2
P.Westwell
B.Leach
12.3.2014
Re-format, various text amendments,
1
P.Westwell
B.Leach
1.8.2013
First issue

Siemens DigiTRON Series Specifications

General

Brand	Siemens
Model	DigiTRON Series
Category	Cables and connectors
Language	English