EasyManuals Logo

Siemens EQ.5 Extra Class User Manual

Siemens EQ.5 Extra Class
Go to English
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
41
en
Problem Cause Solution
Coffee is too “bitter” The grinding setting is
too ne or the pre-ground
coffee is too ne.
Adjust the grinding unit to a
coarser setting or use coarser
pre-ground coffee�
Unsuitable type of coffee� Change type of coffee used�
Coffee or milk froth quality
varies considerably
Build-up of limescale in the
appliance�
Descale the appliance as
described in the instructions�
The coffee grounds are not
compact and are too wet�
The grinding setting is too
ne or too coarse, or not
enough ground coffee has
been used�
Adjust the grinding unit to a
coarser or ner setting, or use
2 level measuring spoons of
ground coffee�
Water dripped onto the
inner oor of the appliance
when the drip tray (8) was
removed�
Drip tray (8) removed too
early�
Wait a few seconds after the
last drink was dispensed before
removing the drip tray (8)�
The water lter does not
stay in position in the
water tank (17)�
The water lter is not
mounted correctly�
Firmly press the water lter
straight down into the tank
connection�
Restore the unit to its
original factory settings
(“Reset”).
You changed some
settings and want to
discard them�
Turn off the unit with the power
on/off switch O / I (9)� Press and
hold the k off / i (13) and the l
(12) button and turn the appliance
on with the power on/off switch
O / I (9). Conrm by pressing the
start button start (10)� The factory
settings are now activated�
Display shows
Refill beans! although the
bean container (1) is full,
or the grinding unit does
not grind the beans�
Beans are not falling into
the grinding unit
(beans too oily)�
Gently tap the bean container (1)�
Change the type of coffee if
necessary
When the bean container (1) is
empty, wipe it with a dry cloth�
Display shows
Insert brewing unit
Brewing unit (5) is missing
or was not recognised�
Switch off the appliance with the
brewing unit (5) in place, wait
three seconds and switch on the
appliance�
Display shows
Clean brewing unit
Brewing unit (5) is soiled� Clean brewing unit (5)�
Too much pre-ground
coffee in the brewing
unit (5)�
Clean brewing unit (5)�
Pour in no more than 2 level
measuring spoons of ground
coffee�
The brewing units
mechanism is stiff�
Remove and clean the brewing
unit, see “Maintenance and daily
cleaning”.
If you are unable to solve the problem, always call the hotline!
You will nd the telephone numbers at the back of these instructions.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens EQ.5 Extra Class and is the answer not in the manual?

Siemens EQ.5 Extra Class Specifications

General IconGeneral
BrandSiemens
ModelEQ.5 Extra Class
CategoryCoffee Maker
LanguageEnglish

Related product manuals