Siemens EQ.500 TQ507D03 - Basic Settings Configuration; Overview of Basic Settings; Changing Basic Settings

Basic settings en
59
Overview of the basic settings
Setting Selection Description
Cleaning and care Milk system
Descale
Clean
calc'nClean
Start service programme.
→"Service programmes",
Page63
Cup warmer
1
Cup warmer off
2
Cup warmer on
Switch cup heater on or off.
→"Cup heater", Page58
Water filter New filter
No filter
Set use of the water filter.
Coffee temp. normal
high
max.
Set the temperature for coffee
drinks.
Note:The setting is effective for
all preparation types.
Languages See options on the appliance. Set menu language.
Changes are immediately dis-
played.
Autom. switch-off See options on the appliance. Set how long the appliance
should wait after preparing the
last drink before automatically
switching itself off.
Water hardness 1 (soft)
2 (medium)
3 (hard)
4 (very hard)
2
Water-softening system
Set the appliance to the local wa-
ter hardness.
→"Setting the water hardness",
Page51
Key tones Key tones on
2
Key tones off
Switch the button tones on or off.
Factory settings Full reset?
Continue: OK
Cancel: ←
Restore settings to the factory
settings.
Note:All individual settings will
be deleted and reset to the fact-
ory settings.
1
Depending on the appliance specifications
2
Factory setting (may vary according to model)
Changing the basic settings
1. Press ⁠.
2. Use or to select the desired
basic setting and press ⁠.
a The display will show the setting op-
tions and the navigation symbols will
light up. The display indicates the
current setting.