Cleaning and servicing en
25
2. Press the symbol for the required
programme.
a The display will guide you through
the programme.
Overview of service programmes
You can find an overview of the service programmes here.
Note:The start image shows the remaining number of beverages that can be
dispensed until running the programme and the duration.
INTENZA filter Insert, replace or remove the water fil-
ter.
Milk system cleaning Rinse the milk system automatically.
calc'nClean Combine cleaning and descaling. Re-
move residues of limescale and cof-
fee from the pipes.
Cleaning Remove residues of coffee from the
pipes.
Descaling Remove residues of limescale from
the pipes.
Brewing unit cleaning The display shows optimum cleaning
of the brewing unit step by step.
Beverage outlet clean-
ing
The display shows optimum cleaning
of the outlet step by step.
Frost protection Drain the pipes to protect the appli-
ance during transport or storage.
Special rinsing If a service programme is interrupted,
e.g. due to a power failure, it will rinse
itself automatically. The appliance is
then ready for use again.
Tips
¡ If you are starting the "Descaling"
or "calc'nClean" programme, keep
a container with a capacity of min.
1l at the ready.
¡ If you use a water filter, this will
prolong the time until you have to
run a service programme.
To Next Page
Loading...
