Siemens EQ.700 classic TP7 Series Information For Use

Troubleshooting en
31
Fault Cause and troubleshooting
Display shows "Please
fill water tank." despite
the fact that the water
tank is full.
▶ Insert a new water filter.
Limescale deposits in the water tank are blocking the
system.
1. Clean the water tank thoroughly.
2. Start the descaling programme.
Display shows "Please
clean brewing unit.".
Brewing unit is soiled.
▶ Clean the brewing unit.
Mechanism of brewing unit is stiff.
▶ Clean the brewing unit.
Display shows "Over-
voltage or under-
voltage".
There are problems with the power supply.
▶ Only operate the appliance at 220-240V.
Display shows "Error
in water system.
Please restart appli-
ance.".
Appliance has a fault.
1. Pull out the mains plug and wait 60seconds.
2. Re-insert the mains plug.
Display very frequently
shows "Please run
calc'nClean pro-
gramme!".
Decalcified water still contains small amounts of lime.
1. Insert a new water filter.
2. Set the corresponding water hardness.
Incorrect or too little descaling agent used.
▶ When descaling, only use suitable tablets.
Service programme has not been carried out in its en-
tirety.
▶ Start the "Special rinsing" service programme.
→"Service programmes", Page24

Siemens EQ.700 classic TP7 Series Specifications

General

Milk Frothing	Yes
Display	iSelect Display
Pump Pressure	19 bar
Adjustable Coffee Strength	Yes
Adjustable Temperature	Yes
iSelect Display	Yes
One-Touch Preparation	Yes
AromaSelect	Yes
User Profiles	Yes
Adjustable Grind Settings	Yes
Color	Black
Power Consumption	1500W
Programmable	Yes
Grinder	Yes
Cleaning System	Automatic cleaning
Coffee Output	2 cups
Milk System	Integrated milk system