en Basic settings
20
Basic setting Selection Description
Add mobile
device
- Connect the appliance to the "Home
Connect" app or additional accounts.
Network informa-
tion
- Display network information and appli-
ance information.
Delete network
settings
- Note:You cannot operate your appli-
ance via the "Home Connect" app
without a network connection.
Software update - Note:This setting is only available
with a software update.
13.2 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the HomeConnect
server (initial registration):
¡ Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡ Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡ The current software and hardware
version of your appliance.
¡ Status of any previous reset to
factory settings.
This initial registration prepares the
HomeConnect functions for use and
is only required when you want to
use the HomeConnect functions for
the first time.
Note:Please note that the
HomeConnect functions can only be
utilised with the HomeConnect app.
Information on data protection can be
retrieved in the HomeConnect app.
Basic settings
14 Basic settings
Basic settings
You can configure your appliance to
meet your needs and call up addi-
tional functions.
14.1 Changing the basic set-
tings
1. Press .
a The display shows the list of basic
settings.
2. Change the required basic setting.
a The appliance saves the basic set-
ting automatically.
3. To exit the basic settings, press
.
14.2 Overview of the basic settings
You can find an overview of the basic settings here.
Beverage setting Brewing temperature Set the brewing temper-
ature.
1
Depending on the appliance specifications
To Next Page
Loading...
