Temporary changeover with
- only if tone/pulse switch is set to "P" -
Once a connection has been set up, you can switch to MF tone dialing by pressing
(e.g. to operate an answering machine).
The telephone automatically reverts to dial pulsing once the connection has been
cleared down.
Setting the volume of tone ringing
Pushbutton on base of telephone:
There are three optional levels:
1 = min. vol.
2 = normal vol.
3 = max. vol.
Last number redial
You can redial the last number dialed by lifting the handset and pressing the
REDIAL key .
The memory is cleared if the number entered contains
more than 32 digits.
To Next Page
Loading...
