Lift the handset and press the speed dialing key/MEM . Enter the speed
dialing destination between 0 and 9.
• A dialed number is not stored if it contains more than
15 digits.
• You can delete the number assigned to a specific
key by overwriting it.
• Dial pauses (approx. 3.6 seconds - not in first
position) can be inserted by pressing the
key.
These pauses are included in the speed
dialing/name keys and redial memory and are
required in the case of certain PABXs (e.g. 0
2368).
• The keys and are stored regardless of
the dial type, but can only be selected in the case of
DTMP signaling.
Repertory keys
Three repertory keys are available for up to 32 digits each.
Storing
Lift the handset and press the SET key . Dial the number and press the
SET key again. Press one of the 3 repertory keys . The number is now
stored on this repertory key. Replace the handset.
To Next Page
Loading...
