19.04.2000 2015-EU1-eng.fm
euroset 2015, A31008-E2015-B100-2-Y719
– 6 –
English
Hearing and being heard
❏
Setting the volume of tone ringing
There are 7 tone ringer volume settings (factory setting: 7).
Setting while the telephone is in standby:
Setting while the phone is ringing:
Press one of the keys
or
before lifting the handset.
The last value set is stored.
❏
Setting the frequency of the ringing tone
There are 3 settings for the frequency (speed) of tone ringing
(factory setting: 3).
❏
Setting the tone ringing melody
10 different melodies can be set for tone ringing (factory setting:
melody 0).
❏
Setting the loudspeaker volume
With the loudspeaker on, you can choose from 7 volume levels during a
call.
>"
Lift the handset, then start the function.
The ringer sounds for checking purposes.
or
Press the plus or minus key.
The volume increases or decreases each time a key
is pressed.
"<
Press the set key, then replace the handset.
>"
Lift the handset, then start the function.
The ringer sounds for checking purposes
.
...
Press one of the keys 1 ... 3:
1
= Lowest frequency;
3
= Highest frequency.
"<
Press the set key, then replace the handset.
>"
Lift the handset, then start the function.
The current melody is played back for checking pur-
poses
.
...
Press one of the keys 0 ... 9.
The relevant melody is played back for checking pur-
poses
.
"<
Press the set key, then replace the handset.
or
Press the plus or minus key.
The volume increases or decreases each time a key
is pressed.
To Next Page
Loading...
