Siemens EX775LYE4E - To Access the Basic Settings

Basic settings en
35
To access the basic settings:
The hob must be off.
1. Switch on the hob.
2. Within ten seconds, touch and hold the 0 symbol
for approximately four seconds.
The first four displays provide product information.
Touch the settings area to view the individual
displays.
3. Touching the 0 symbol again takes you to the basic
settings.
™‚ and ‹ light up as a presetting in the displays.
4. Touch the 0 symbol repeatedly until the required
function is displayed.
5. Then select the required setting from the settings
area.
6. Touch the 0 symbol for at least four seconds.
The settings have been saved.
Leaving the basic settings
Turn off the hob with the main switch.
™‚„
Configuring activation of the flexible cooking zone
‹ As two independent hotplates.
‚ As a single hotplate.*
™‚…
Connecting the wireless temperature sensor to the hob
‹ Connected correctly
‚ Not connected correctly: Transmission error.
ƒ Not connected correctly: Temperature sensor fault.
™‹
Restoring the factory settings
‹ Individual settings.*
‚ Restore factory settings.
Display Function
* Factory settings
Product information Display screen
After-sales service index (ASSI)
‹‚
Production number
”š
Production number 1
Š†.
Production number 2
‹.†