Siemens EX8 LX6 Series - Basic settings; Childproof lock settings; Signal tones and display settings; Power management settings

en Basic settings
44
QBasic settings
Ba s i c set t i ngs The appliance has various basic settings. These basic
settings can be altered to suit your individual
requirements.
Indicator/
symbol
Function
™‚
Childproof lock
‹ Manual*.
‚ Automatic.
ƒ Function deactivated.
™ƒ
Signal tones
‹ Confirmation and fault signals are switched off.
‚ Only the fault signal is switched on.
ƒ Only the confirmation signal is switched on.
„ All signal tones are switched on.*
™„
Display energy consumption
‹ Deactivated.*
‚ Activated.
™…
Setting to account for height above sea level
‚-ƒ Decrease
„o Basic setting
… - Š Expansion
™†
Automatically programming the cooking time
‹‹ Switched off.*
‹‚-ŠŠ Time until automatic switch-off.
™‡
Audible signal duration for the timer function
‚ 10 seconds.*
ƒ 30 seconds.
„ 1 minute.
™ˆ
Power management function. Limiting the total power of the hob
The available settings depend on the maximum power of the hob.
‹ Deactivated. Maximum power of the hob.
*/**
‚ 1000 W minimum power.
‚.† 1500 W
...
„ 3000 W recommended for 13 A.
„.† 3500 W recommended for 16 A.
… 4000 W
….† 4500 W recommended for 20 A.
...
Š or Š.†Maximum power of the hob.**
™‚‚
Changing preset power levels for the Move function
׊ Preset power level for the front cooking area.
Ù† Preset power level for the central cooking area.
Ø‚.† Preset power level for the rear cooking area.