Siemens EX875KYV1E - Page 15

flexMotion en
15
15 flexMotion
You can use this function to transfer the power level
and the programmed cooking time from one cooking
zone to another.
15.1 flexMotion
Requirement:Move the cookware to a cooking zone
which is not switched on, which you have not yet pre-
set and on which no other cookware has been previ-
ously placed.
1.
Move the cookware.
The cookware is detected. After a few seconds, the
option to confirm the default settings for the new
cooking zone appears on the display.
2.
Confirm the settings.
a The settings are transferred to the new cooking
zone.
16 fryingSensor
Suitable for cooking or reducing sauces, pancakes or
frying eggs with butter, for frying vegetables or steaks
up to the required level of boiling, and for keeping the
temperature under control.
Instead of frequently adjusting the power level during
cooking, select the required target temperature once at
the start. The sensors under the glass ceramic meas-
ure the temperature of the cookware and keep this
constant throughout the entire cooking process.
This function is available on all cooking zones marked
with this symbol
⁠.
16.1 Advantages
¡ The temperature is automatically kept constant
without you having to change the power level.
¡ Oil does not overheat. This prevents the food from
burning.
¡ The cooking zone only continues heating for as long
as this is necessary to maintain the temperature.
This saves energy.
16.2 Temperature levels
Temperature levels for preparing meals.
Level Temper-
ature
Functions Cookware
1 120ºC Boiling and reducing
sauces, fry veget-
ables
2 140ºC Searing in olive oil or
butter
3 160ºC Frying fish and
coarse foods
4 180ºC Deep-fat frying
breaded, frozen and
grilled food
5 215ºC High-temperature grill
and griddle plate
16.3 Recommended cookware
Special cookware has been developed for this function,
which delivers the best results.
Cookware Recommended cooking
zone
Frying pan, 15cmdia-
meter
Single cooking zone
Frying pan, 19cmdia-
meter
Single cooking zone
Frying pan, 21cmdia-
meter
Single cooking zone
Frying pan, 28cmdia-
meter
Extended FlexZone
Teppanyaki ⁠ Flex Zone
Grill ⁠ Flex Zone
The recommended cookware is available from cus-
tomer service, specialist retailers or our online shop
siemens-home.bsh-group.com .
Note:You can also use other cookware. Depending on
the composition of the cookware, the achieved temper-
ature may differ from the selected temperature level.
16.4 Switching on the fryingSensor
1.
Place empty cookware on the cooking zone.
2.
Select a cooking zone.
3.
Touch the active cooking mode and select
the
⁠fryingSensor option.
4.
Select the temperature level you require and touch
the cooking zone to return to the main screen.
a The function is switched on.
a
⁠ on the cooking zone flashes until the cooking
zone reaches the frying temperature. A signal
sounds and the display stops flashing.
5.
Add the frying fat and then the food to the frying
pan.