Siemens EX875KYV1E - Hob-Based Hood Control

Hob-based hood control en
21
24.2 Controlling the extractor hood via the
hob
You can change the behaviour of your extractor hood
in the basic settings of your hob, depending on switch-
on/off of the hob or individual cooking zones.
You can select other settings using the controls on the
hob.
Setting the fan
1.
Touch
⁠ on the control panel.
a The display shows the preset fan setting.
2.
Select a fan setting.
You can choose between the levels 1, 2 and 3.
To set an intensive setting, touch int 1 or int 2.
Switching off the fan
1.
Touch
⁠ on the control panel.
2.
Select fan setting 0.
Switching on automatic mode
1.
Touch ⁠ on the control panel.
2.
Select ⁠.
a The fan starts automatically when steam is pro-
duced.
Switching off automatic mode
1.
Touch
⁠ on the control panel.
2.
Select fan setting 0.
Setting the hood lighting
You can switch the hood lighting on and off using the
control panel of the hob.
▶
To switch on the lighting, touch
⁠ in the main
screen.
24.3 Overview of the hood control settings
You can change the behaviour of your extractor hood in the basic settings of your hob, depending on switch-on/off
of the hob or individual cooking zones.
The display shows the settings only when the appliance has been connected to the extractor hood.
Setting Selection Description
Fan control (automatic start) Switched off – The extractor hood must
be switched on manually, if required.
Switched on in automatic mode
1
– In
automatic mode, the hood switches it-
self on when you switch on any of the
cooking zones.
Switched on in standard mode – The
extractor hood is switched on at a spe-
cified setting when a cooking zone is
switched on.
You can set whether/how the fan starts
when you switch on the hob.
Fan run-on Fan off.
Switched on in automatic mode.
1
Switched on with standard fan run-on.
The fan settings cannot be adjusted
when the hob is switched off.
You can set whether/how the contin-
ues to run when you switch off the hob.
Automatic light activation ¡ Off
¡ On
1
– The light is switched on when
the hob is switched on.
You can set whether the lighting for the
extractor hood switches on automatic-
ally with the hob.
Automatic light deactivation ¡ Off
1
¡ On – The light switches itself off
when the hob is switched off.
You can set whether the lighting for the
extractor hood switches off automatic-
ally with the hob.
Disconnect - With this setting, you reset the saved
connections to the Wi-Fi or go back to
the extractor hood.
1
Factory setting (may vary according to model)