Siemens EX875KYW1E - Meal Assistant and Frying Sensor; Overview of Meal Assistant; Understanding the fryingSensor

Meal assistant en
15
1.
Move the cookware.
The cookware is detected. After a few seconds, the
option to confirm the default settings for the new
cooking zone appears on the display.
2.
Confirm the settings.
a The settings are transferred to the new cooking
zone.
Meal assistant
16 Meal assistant
The cooking assistant is guaranteed to make cooking
simple and it promises outstanding cooking results.
If you have selected the required temperature, the
sensors continuously measure the temperature of the
cookware and keep it constant during the cooking pro-
cess.
Advantages
¡ Once the selected temperature is reached, it auto-
matically keeps it constant, saving energy.
¡ The oil will not overheat and the food will not boil
over.
16.1 fryingSensor
Suitable for cooking or reducing sauces, pancakes or
frying eggs with butter, for frying vegetables or steaks
up to the required level of boiling, and for keeping the
temperature under control.
This function is available on all cooking zones marked
with this symbol ⁠.
Temperature levels
Temperature levels for preparing meals.
Level Temper-
ature
Functions Cookware
1 120ºC Boiling and reducing
sauces, fry veget-
ables
2 140ºC Searing in olive oil or
butter
3 160ºC Frying fish and
coarse foods
4 180ºC Deep-fat frying
breaded, frozen and
grilled food
5 215ºC High-temperature grill
and griddle plate
Recommended cookware
Special cookware has been developed for this function,
which delivers the best results.
Cookware Recommended cooking
zone
Frying pan, 15cmdia-
meter
Single cooking zone
Cookware Recommended cooking
zone
Frying pan, 19cmdia-
meter
Single cooking zone
Frying pan, 21cmdia-
meter
Single cooking zone
Frying pan, 28cmdia-
meter
Extended FlexZone
Teppanyaki Flex Zone
Grill Flex Zone
The recommended cookware is available from cus-
tomer service, specialist retailers or our online shop
siemens-home.bsh-group.com.
Note:You can also use other cookware. Depending on
the composition of the cookware, the achieved temper-
ature may differ from the selected temperature level.
Switching on the fryingSensor
1.
Place empty cookware on the cooking zone.
2.
Select a cooking zone.
3.
Touch the active cooking mode and select the
⁠fryingSensor option.
4.
Select the temperature level you require and touch
the cooking zone to return to the main screen.
a The function is switched on.
a on the cooking zone flashes until the cooking
zone reaches the frying temperature. A signal
sounds and the display stops flashing.
5.
Add the frying fat and then the food to the frying
pan.
Switching off fryingSensor
1.
Select the cooking zone.
2.
Set to 0.
a The function is switched off.
3.
To exit the fryingSensor function, select a different
cooking mode.
Recommendations for cooking with
fryingSensor
The following table shows the ideal temperature levels
for a selection of dishes. The temperature and the
cooking time depend on the amount, condition
and quality of the food.
¡ Frying pan
¡ ⁠Teppanyaki