4
Gigaset AS140 / IM-eng / A31008-M1696-R101-1-3T19 / Wyoming_IM-eng.fm / 21.06.2007
Dialling with the directory
Speed dialling
Example: Press key I long ¢c.
Last number redial list
This list contains the five last dialled numbers.
Þ (open the list) ¢ MENU.
The following functions are available:
Clear the list:
Þ ¢MENU¢L ¢OK.
Dialling a number
You can select a number from the last number
redial list:
Þ ¢ Select an entry ¢ c.
Calls list/Mailbox list
Press the display key
Û
to open the caller list and
mailbox list (see Menu Tree, page 9).
Calls list: The number of the last 30 missed calls
are stored.
When the phone is in idle status, new missed calls
are indicated by a flashing .
Example of how the calls list appears:
Opening the calls list and selecting an entry
You can view entries you have already read.
Using the calls list
Û
¢ Select an entry (see above)¢ MENU.
The following functions are available:
Calling back a caller from the calls list:
Û
¢ Select an entry ¢ c.
Registering and de-registering
handsets
You can register up to four handsets on your base
station.
A Gigaset AS14 handset that is not yet registered
on a base is registered automatically. Other hand-
sets must be registered manually.
Automatic registering:
Gigaset handset AS14
Any Gigaset AS14 handset that is not registered to
a base can be registered automatically. To register
a handset for the first time, place it in the base with
the display facing forward. Registering takes
about 1 minute; a number of icons flash in the dis-
play. The handset is automatically assigned the
next available internal number (1–4). This number
appears in the top left of the display after success-
ful registering, e.g. "2". If all of the internal num-
bers 1 to 4 are used up (i.e. four handsets have
been registered), handset number 4 is de-regis-
tered and overwritten.
Manual registering:
Gigaset handset AS14
1. On the handset: MENU ¢ REGISTER HS ¢
enter your system PIN (default is 0000)
¢ OK.
The display shows
REGISTER HS during the regis-
tration procedure.
2. On the base: Within 60 sec. of entering the sys-
tem PIN, press the register/paging key on the front
of the base (page 1) and hold for approx. 3 sec.
The registration process starts.
h
Open the directory.
~
Enter the first letter of the name.
s
If there is more then one entry,
select the name.
c
Press the talk key.
EDIT ENTRY
Add/edit number and use to
dial
COPY TO DIR
Store number in directory
Û
Open calls list.
s CALLS OK
Confirm.
The last incoming call is dis-
played.
s
Select entry.
Û
CALLS 02/08
Number of old, read entries
Number of new entries
DELETE
Delete an individual number
COPY TO DIR
Store a number in the direc-
tory. Enter name
TIME
Establish date and time of a call
STATUS
Read or not read
DELETE LIST
Delete complete calls list
To Next Page
Loading...
