Siemens Gigaset AS180 - Answer Machine Functionality; Recording Personal Announcements; Call and Voicemail Lists; Opening the Calls List

9
AS180-AS280 / GRC EN / A31008-M2002-T101-1-8U19 / main.fm / 08.01.2009
Assigning key 1 for fast access to the
network mailbox
Simply press and hold key 1 on the handset and
you will be connected directly to the network mail-
box.
See Menu tree
¢ page 13.
Locating a handset ("paging")
You can locate your handset using the base station.
◆ Briefly press the registration/paging key on the
base station (
¢ page 1).
◆ All handsets will ring simultaneously ("pag-
ing"), even if the ringer tones are deactivated.
End paging: brie
fly press the registration/paging
key on the base station (
¢ page 1) or the
talk key
c on a handset.
Registering handsets
You can register up to four handsets on your base
station (Gigaset AS18H/AS28H) recommended).
For automatic registration of handsets to
Gi
gaset AS180/AS280
¢ page 5.
Manual registration of handsets to Gigaset AS180/
AS280
1. On the handset: MENU ¢ Settings ¢ OK
¢ Handset ¢ OK ¢ Register HS ¢ OK ¢ Enter the
system PIN of the base station (default is 0000)
¢ OK.
Registering flashes in the display.
2. On the base station: wit
hin 60 seconds of
entering the system PIN, press and hold the regis-
tration/paging key (
¢ page 1) (min. 3 seconds).
Registration takes approx. 1 minute.
De-registering handsets
Handsets can only be de-registered by resetting
the base station to its default settings. This will
also reset other settings
¢ page 10.
If you have on
ly registered handsets for other GAP-
compatible devices, these can only be de-regis-
tered with a h
ardware reset ¢ page 10.
Using several handsets
Making internal calls
Internal calls are free calls to other handsets that
are registered to the same base station.
To make a call to other handsets, press
◆ INT ¢ ~ (1...4, enter internal number of the
handset), the handset is called or
◆ INT ¢ star key P, all handsets are called.
When a participant answers you can speak to
t
hem. To end the call, press the end call key
a.
Internal consultation call/connecting
a call
You are in conversation with an external partici-
pant. Press the
INT key and call one or all handsets.
The external participant hears the hold music.
◆ Before the internal participant has answered,
press the end call key
a; the call is diverted to
the participant who answers the call.
◆ After the internal participant has answered,
you can talk to him. Press the end call key
a;
the call is diverted, or press the display key
”;
you are reconnected to the external participant.
Listening in to an external call
You are conducting an external call. An internal
participant can listen in on this call and take part in
the conversation (conference).
Precondition: Th
e Listening in function must be
activated.
Activating/deactivating listening in
MENU ¢ Settings ¢ OK ¢ Base ¢ OK
¢ Listening in ¢ OK (‰ = on)
Internal listening in (conference)
You want to listen in to an existing external call.
Press and hold the
c key. You can listen in to the
call. All participants hear a signal tone.
To end:
press the end call key a. All participants
hear a signal tone.
If the fi
rst internal participant presses the end call
key
a, the handset that has "listened in" remains
connected to the external participant.
Please note:
Each a
dditional handset must be registered on
the base station in order for it to work properly!