18
Making calls using network services
Gigaset C470/C475 / Grossbritannien / A31008-M1902-L101-1-7619 / TNet_Features_SAG.fm / 6.8.07
Version 4, 16.09.2005
Making calls using network
services
Network services are functions that your
network provider makes available to you.
You have to request these services from
your network provider.
¤ If you require assistance, please con-
tact your network provider.
Setting functions for the
next call
Withhold No.
Withhold Calling Line Identification for
the next call (CLIR).
v
¢ ê ¢ Withhold No.
~ Enter number.
c Press the talk key.
Setting functions for all
subsequent calls
If you have completed one of the follow-
ing procedures, a code is sent.
¤ After confirmation from the telephone
network, press the end call key a.
You can set the following features:
General call diversion
v ¢ ê ¢ All Calls ¢ Call Divert
¤ Change multiple line input:
When:
All Calls / No Answer / When Busy.
Call No.:
Press the display key
§Edit§. Enter the
number to which the call is to be
diverted
or:
Press s. Select number from the
directory and press
§OK§.
Press
§Save§ to save.
Status:
Activate/deactivate call diversion.
¤ Press the display key §Send§.
a After the announcement,
press the end call key.
Activating/deactivating call waiting
v ¢ ê ¢ All Calls ¢ Call Waiting
Status: Activate/deactivate.
§Send§ Press the display key.
Functions during a call
Initiating ringback
You hear the busy tone.
§Options§ ¢ Ringback
a Press the end call key.
Consultation
During a call:
§Ext.Call§ Press the display key.
~ Enter the number.
You have the following options:
u Toggling:
¤ Use q to toggle between the par-
ticipants.
u End call with both participants:
¤ Press the end call key a.
Accepting call waiting
§Accept§ Press the display key.
You have the option of toggling or holding
a conference call.
Accepting a waiting call
§Options§ ¢ Accept waiting call
Please note:
Without CLIP a waiting call is only announced
with a signal tone.
To Next Page
Loading...
