Siemens Gigaset C450 - Setting the display backlight; Activating;deactivating auto answer; Changing the handsfree;earpiece volume; Setting the volume during a call:

46
Setting the handset
Gigaset C470/C475 / Grossbritannien / A31008-M1902-L101-1-7619 / registr_sett.fm / 6.8.07
Version 4, 16.09.2005
Setting the display backlight
Depending on whether or not the handset
is in the charging cradle, you can activate
or deactivate the backlight. If the base sta-
tion is turned on, the display is perma-
nently dimmed.
v
¢ Ð ¢ Display ¢ Backlight
The current setting is displayed.
¤ Change multiple line input:
In Charger
Select On or Off.
Without Charger
Select On or Off.
§Save§ Press the display key.
a Press and hold (idle status).
Activating/deactivating
auto answer
If you activate this function, when you
receive a call you can simply lift the hand-
set out of the charging cradle without hav-
ing to press the talk key c.
v
¢ Ð ¢ Handset
Auto Answer
Select and press
§OK§ (=on).
a Press and hold (idle status).
Changing the handsfree/
earpiece volume
You can set the loudspeaker volume for
handsfree talking to five different levels
and the earpiece volume to three different
levels.
t
¢ Handset Volume
r Set the earpiece volume.
s Scroll to the Speaker: line.
r Set the handsfree volume.
§Save§ Press display key if necessary
to save the setting perma-
nently.
Setting the volume during a call:
t Press the control key.
r Select volume.
§Save§ Press display key if necessary
to save the setting perma-
nently.
The setting will automatically be saved
after approx. 3 seconds, if not then press
the display key
§Save§.
If t is assigned to another function, e.g.
toggling (page 18):
§Options§ Open menu.
Volume Select and press §OK§.
Configure setting (see above).
Please note:
With the On setting, the standby time of the
handset can be significantly reduced.
‰
Please note:
You can also set the call volume, the ringer
tones and the advisory tones via the menu
(see page 15).