Siemens Gigaset C59H - Handset Accessories and Placement; Attaching the Belt Clip; Placing in Charging Cradle

10
First steps
Gigaset C59H / IM1 EN / A31008-M2150-R101-1-4N19 / starting.fm / 25.05.2009
Version 4, 16.09.2005
Attaching the belt clip
The handset has notches on each side to attach the belt clip.
¤ To attach — press the belt clip
onto the back of the handset so
that the protrusions on the belt
clip engage with the notches.
¤ To remove — using your right
thumb apply pressure to the
centre of the belt clip, push the
fingernail of your left index fin-
ger between the clip and the
casing and lift the clip upwards.
Placing the handset in the
charging cradle
¤ Place the handset in the charging cradle with its display facing forward.
To charge the batteries, leave the handset in the charging cradle.
Please note
Only place the handset in the charging cradle that is intended for it.