Siemens Gigaset C59H - Display and Audio Customization; Font, Volume, and Auto Answer Settings

38
Setting the handset
Gigaset C59H / IM1 EN / A31008-M2150-R101-1-4N19 / registr_sett.fm / 25.05.2009
Version 4, 16.09.2005
s Select screensaver and
press
§OK§.
§Save§ Press the display key.
When the screensaver conceals the dis-
play, briefly press a to show the idle
display.
Setting large font
You can increase the font size of print and
symbols in selection fields, lists and in the
directory to improve readability. After
doing this, only one entry instead of mul-
tiple entries can be shown at the same
time on each display and names are short-
ened where necessary.
v
¢
Ï
¢ Display ¢ Large Font
§Change§ Press display key (³=on).
Setting the colour scheme
You can set the display to have a dark or
light background.
v
¢
Ï
¢ Display ¢ Colour Schemes
Select Colour Scheme 1 or Colour Scheme 2
and press
§OK§.
Setting the display backlight
Depending on whether or not the handset
is in the charging cradle, you can activate
or deactivate the backlight. If it is acti-
vated, the display is permanently
dimmed.
v
¢
Ï
¢ Display ¢ Backlight
The current setting is displayed.
¤ You can enter data in the following
fields:
In Charger
Select On or Off.
Out of Charger
Select On or Off.
§Save§ Press the display key.
Activating/deactivating auto
answer
When this function is activated, when a
call arrives, you can simply lift the handset
out of the charging cradle without having
to press the talk key c.
v
¢
Ï
¢Telephony ¢ Auto Answer
§Change§ Press display key (³=on).
Changing the speaker/earpiece
volume
You can set the loudspeaker volume for
speaker mode and the earpiece volume to
five different levels.
In idle status:
t Call up the Handset Volume
menu.
r Set the earpiece volume.
s Scroll to the Speaker: line.
r Set the speaker volume.
§Save§ Press the display key if neces-
sary to save the setting perma-
nently.
Setting the volume during a call:
t Press the control key.
r Select volume.
The setting will automatically be saved
after approximately 3 seconds, if not then
press the display key
§Save§.
If t is assigned a different function:
§Options§ Open menu.
Volume Select and press §OK§.
Configure setting (see above).
Please note
With the On setting, the standby
time of the handset can be signifi-
cantly reduced.
•
Please note
You can also set the call volume using
the menu (
¢ page 24).
•