Siemens Gigaset C59H - Setting Date and Time; Entering and Saving Date;Time

13
First steps
Gigaset C59H / IM1 EN / A31008-M2150-R101-1-4N19 / starting.fm / 25.05.2009
Version 4, 16.09.2005
Setting the date and time
Set the date and time so that the correct date and time can be assigned to
incoming calls, and so that the alarm can be used.
Date/Time
Date:
14.10.2009
Time:
00:00
Back Save
¤ Press the key below §Time§ on the
screen display to open the input
field.
(If you have already set the time and
date, open the input field via the
menu
¢ page 24.)
The Date/Time submenu is shown on the
display.
¤ The active input position flashes.
Enter day, month and year as an
8-digit number via the keypad,
e.g., 4Q2Q
QO for 14/10/2009.
Date/Time
Date:
31.01.2009
Time:
00:00
Back Save
Calls Time
Press the right or left control
key to change the input posi-
tion and correct an entry.
¤ Enter the hours and minutes in
4-digit format via the keypad,
e.g., QM5
for 07:15 am.
Change the input position with
the control key if necessary.
¤ Press down on the control key to switch to
the Time input field.