Siemens GIGASET C88 - Switching Temporarily to Tone Dialing; Setting Pauses

33
Press Keys:
Base Station Settings
Base Station Settings
All base station settings are conveniently made us-
ing the handset!
Changing the System PIN
To protect the system settings from unauthorized
access, you should change the default PIN (0000)
to a PIN that only you know. T
åååååååååååå
MENU
Open the Menu.
ååååååå åååååååååååååååååååååååååååååååå ååååååå
Z BASE SETT [
Scroll to Base Settings and press OK.
ååååååå åååååååååååååååååååååååååååååååå ååååååå
Z SYSTEM PIN [
Scroll to System PIN and press OK.
o Enter the default system PIN (default: 0000).
For security reasons, only four asterisks (****) are
displayed.
ååååååå
[
Press OK.
o Enter the new system PIN (4 digits).
ååååååå
[
Four asterisks (****) representing your PIN are dis-
played again. Press OK.
o Repeat the new system PIN.
ååååååå
[
Press OK.
Resetting the Base Station
to the Default Setting
You may want to reset your base station to its de-
fault settings. Resetting the base station does not
affect the system PIN or handset registration.
åååååååååååå
MENU
Open the Menu.
ååååååå åååååååååååååååååååååååååååååååå ååååååå
Z BASE SETT [
Scroll to Base Settings and press OK.
ååååååå åååååååååååååååååååååååååååååååå ååååååå
Z DEFAULT SETT [
Scroll to Default and press OK.
ååååååå
o [
Enter the system PIN (default setting: 0000) and
press OK.
åååååååååååååååååååååååååååååååå ååååååå
RESET ? [
Press OK at the prompt.
Ö
Ö